Automation & Smart Building · November 16, 2026

Guest Room Management Systems: What to Specify

A practical checklist of what a hotel guest room management system should include, from occupancy sensing to PMS integration, before you issue tender documents.

A guest room management system (GRMS) is the layer that makes a hotel room respond to the guest: lights, curtains, air conditioning and do-not-disturb status all working from one set of controls. A clear specification at tender stage avoids mismatched components and expensive late changes.

Core components

  • Room controller: the processor that runs lighting scenes, HVAC logic and inputs for the room.
  • Key card or RFID energy switch: enables room power and “welcome” scenes when a card is inserted or detected.
  • Occupancy and door sensing: separates a guest being present from the room merely being rented.
  • Thermostat and HVAC actuators: setback when the room is unoccupied and comfort control when it is not.
  • Bedside and entrance panels: scene control, “all off” and curtain or shade control from the bed.
  • DND and make-up-room indicators: status that is visible to housekeeping without disturbing guests.

Integration points to define early

State which systems the GRMS must talk to: the property management system, the building management system, in-room entertainment and shading. Specify the protocol (for example KNX, BACnet or Modbus) and who is responsible for each interface. Most commissioning problems come from interfaces nobody owned.

Behaviour, not just hardware

Write down the room states you expect: vacant, rented-unoccupied, occupied, DND, make-up-room and maintenance. Define what each does to lighting, temperature and signalling, and how the room behaves on power failure or network loss.

Commissioning and handover

Ask for a standard room template that is programmed once and replicated, a factory acceptance test, and as-built documentation so the operator can service the system without the original contractor.

Gravity Trading supplies GRMS controllers, RFID card holders, bedside scene panels and DND indicators, ready to integrate with KNX and BACnet. Explore our automation range, read the FAQ, or request a quote for your hotel project.